Services
RIGGING REPAIRS & RECERTIFICATION
All repairs and recertifications are performed throroughly by fully qualified & certified employees of SPARTAN SLING. Wire rope & nylon bridle sling repairs typically retain customer hardware, depending on condition. Chain sling components are replaced as required according to damage indicated.
SPARTAN SLING offers certified repairs to the following items:
| Electric Hoists |
| 110 - 220 - 460 Volt |
| All Major Brands |
| Inspect -- Quote -- Repair |
| Full Recertification to Industry Standards |
| Chainfalls |
| All Major Brands |
| Inspect -- Quote -- Repair |
| Full Recertification to Industry Standards |
| Come-alongs, Pullers & Lever Tools |
| All Major Brands |
| Inspect -- Quote -- Repair |
| Full Recertification to Industry Standards |
| Plate Clamps |
| All Major Brands |
| Inspect -- Quote -- Repair |
| Full Recertification to Industry Standards |
| Swivel Hoist Rings |
| All Major Brands |
| Inspect -- Quote -- Repair |
| Full Recertification to Industry Standards |
| Lifting Magnets |
| Most Major Brands |
| Inspect -- Quote -- Repair |
| Full Recertification to Industry Standards |
| Overhead Lifting Chain Slings |
| Grade 80 & Grade 100 |
| Inspect -- Quote -- Repair |
| Full Recertification to Industry Standards |
| Wire Rope Bridle Slings |
| 2, 3, 4 leg or more. FC, IWRC, NR |
| Inspect -- Quote -- Repair |
| Full Recertification to Industry Standards |
| Nylon & Polyester Bridle Slings |
| 2, 3, 4 leg or more. |
| Inspect -- Quote -- Repair |
| Full Recertification to Industry Standards |
LIFTING & RIGGING CONSULTATIONS
Engineered Lifts
SPARTAN SLING MFG has been directly involved in engineered lifts and is more than willing to work with engineers, supervisors & foremen involved. With many, many years of experience in rigging fabrication and implementation combined with the advantage of being thoroughly up to date with the newest rigging products, we enjoy assisting with these engineered lifts.
Heavy Lifts
SPARTAN SLING MFG has been directly involved in heavy lifts and is more than willing to work with owners, management, engineers, supervisors & foremen involved. Once again, with many, many years of experience in rigging fabrication and implementation combined with the advantage of being thoroughly up to date with the newest rigging products, we enjoy assisting with these heavy lifts.
Awkward Lifts
SPARTAN SLING MFG has been directly involved in many ‘odd ball’ lifts over the years, bringing about safe, simple resolutions to each one. Once again, with many, many years of experience in rigging fabrication and implementation combined with the advantage of being thoroughly up to date with the newest rigging products, we enjoy assisting with these ‘odd ball’ lifts.
Better - Safer Lifting Practices
SPARTAN SLING MFG has been actively involved in introducing better ways to perform lifts to owners, management, engineers, supervisors & foremen involved. The lifting methods presented are based on safety, ease of use & hopefully… increased production.
Rigging Inventory Assessments
SPARTAN SLING MFG personnel are constantly striving to save our customers’ money while increasing their production… never at the expense of safety however. Typically, we find that a shop / plant has an over abundance of rigging during the annual inspection. This will be brought to the attention of management so that they may determine what rigging might be quarantined to replace any rigging damaged in the future. We will also advise how to quarantine that rigging according to OSHA & MOL requirements.
SPARTAN SLING MFG INC personnel are exceptionally good at their job. Please give us a call with any of your overhead lifting requirements… mundane or insane, we will sort them all out.
MINISTRY REQUIRED LIFTING GEAR INSPECTIONS
“All overhead lifting devices shall be inspected & certified annually"
SPARTAN SLING MFG INC takes great pride in the expertise of our inspection team. Every new employee is trained to fabricate chain slings, nylon slings and wire rope slings while working with the owner. Throughout this process, the employees are included in ‘in house’ inspections of rigging materials so that they become familiar with the correct methods of inspection for each product. This method also teaches the new employees exactly what to look for initially according to the industry served.
Once the owner is confident that the new employees have mastered sling fabrication & inspection of used rigging materials, they will be paired up with senior inspectors to assist with ‘off site’ inspections. The senior inspector will report back to the owner on how proficient the new employee is. Based on a positive recommendation, the new employee will be sent to O.E.M. corporations for specific product training & certification. Although it may sound like we are carrying the training a bit too far... We do not believe so.
SPARTAN SLING MFG INC inspectors are second to none. They clearly understand their 2 primary responsibilities… Protect the worker on the ground from physical harm and the 2nd part is taken care of… we have protected that corporation from financial harm.
From the inception date of SPARTAN SLING MFG INC we have never had to call the lawyer or the insurance company in over 31 years.
ANNUAL RIGGING INSPECTIONS
Offsite - Your Facility
Initial visit to your site to determine time investment Quotation follows visit Inspection date established 1 or 2 certified inspectors on site Fully geared up with inspection tools Hardhats, X-11, Safety Glasses, Green Patch work boots & gloves Damaged rigging will be quoted for repair / replacement Repairs / replacement will be quickly performed & returned to your facility Paper certification will be presented along with USB Following year inspection date will be recorded in our database
Onsite - Our Facility
Initial visit to your site to determine time investment Quotation follows visit Inspection date established Damaged rigging will be quoted for repair / replacement Repairs / replacement will be quickly performed & returned to your facility Paper certification will be presented along with USB Following year inspection date will be recorded in our database
EMERGENCY RIGGING INSPECTIONS
Offsite - Your Job / Project Site
Initial visit to your site to determine time investment* Quotation follows visit* Inspection date established* 1 or 2 certified inspectors on site* Fully geared up with inspection tools Hardhats, X-11, Safety Glasses, Green Patch work boots & gloves Damaged rigging will be quoted for repair / replacement Repairs / replacement will be quickly performed & returned to your facility Paper certification will be presented along with USB
* These emergency inspections are typically out of town contractors performing work at major corporations that arrive with expired certification. We have performed many of these over the years and have developed a procedure that permits their project to commence almost immediately. These emergency inspections are rarely performed on a quotation basis or based on a site visit. Typically, they start with one of our inspectors and a 2nd or 3rd will join after hours to ensure timely completion.
ENGINEERED PRE-LIFT RIGGING INSPECTIONS
Offsite - Your Job / Project Site
List of required rigging to determine time investment Quotation provided based on rigging to inspect Inspection date established 1 or 2 certified inspectors on site depending on rigging* Fully geared up with inspection tools Hardhats, X-11, Safety Glasses, Green Patch work boots & gloves Damaged rigging will be quoted for repair / replacement Repairs / replacement will be quickly performed & returned to your facility Paper certification will be presented along with USB
* Most of the rigging required for the engineered lift will require a physical ‘pull test’ for approved certification. These items must be brought / sent to our Oldcastle facility for proper pull testing and ‘peak pull’ recording.
HEAVY LIFT RIGGING INSPECTIONS
Offsite - Your Job / Project Site
List of required rigging to determine time investment Quotation provided based on rigging to inspect Inspection date established 1 or 2 certified inspectors on site depending on rigging* Fully geared up with inspection tools Hardhats, X-11, Safety Glasses, Green Patch work boots & gloves Damaged rigging will be quoted for repair / replacement Repairs / replacement will be quickly performed & returned to your facility Paper certification will be presented along with USB
* Some of the rigging required for the engineered lift may require a physical ‘pull test’ for approved certification. These items must be brought / sent to our Oldcastle facility for proper pull testing and ‘peak pull’ recording.
